Filter
Top Products
106
Chapter 5 Settings
received and recorded, but it cannot be displayed on the monitoring
screen.
Storage Settings
You can specify the storage location the camera uses for each recording type.
Alarm
Select the storage location for the camera to save alarm recordings.
Manual
Select the storage location for the camera to save manual recordings.
Normal
Select the storage location for the camera to save normal recordings.
Caution
If the storage settings are modified, the new settings are reflected from
the first recording to start thereafter. If a camera’s storage settings are
modified while a recording is in progress, they are not reflected in the
current recording.
Setting a Camera by Using Generic Camera
This version of NSR supports the “Generic Camera.” NSR obtains various
information data from a camera when registering it and connects to the camera
based on this information. Because the protocol and procedures for obtaining
information from a Generic Camera are standardized, cameras sold in future
will also be supported, provided that they follow the standard.
Note
This version of NSR supports Generic Camera version 1.
Operation flow when using Generic Camera
The procedure for registering and setting up a camera with the Generic Camera
option is slightly different from regular camera registration. First, you must
select a combination of functions and then perform setup. When you select the
combination of functions, the setting range for each item is determined
automatically. Therefore it is important to select the combination of functions
carefully with regard to the intended use of the camera.
Caution
• Available settings and setting value ranges will vary depending on the
function combination. Be sure to make settings that are matched to the
intended operation.
1
Registering a Generic Camera.
r
2
Selecting a combination of functions.
r
3
Making the required settings at the various
setup screens.
After setting, be sure to check all setting values.
r
4
Starting operation.