Sony 3-869-888-16 (1) Security Camera User Manual


 
121
Chapter 5 Settings
[PLAYBACK] Button
Click this button to display recorded images stored on the camera.
When you click this button, the playback control buttons and quick search
buttons appear.
This toolbar is used to play back recordings.
For details on the use of each button, see “qf Play speed” under
“Monitoring Window (Monitor 1)” (page 54).
This toolbar is used to specify the playback position of a recorded image by
date and time when performing a quick search.
For details, see “Quick Search” (page 67).
4
After setting each item, click [Save] at the top right of the screen.
Sensor Input
You can configure sensor input pins and Video Motion Detection (Camera) pins
for the NSR and cameras with “Sensor Input”.
Adding a Sensor Input Pin to the NSR
By adding a logical sensor input pin to the NSR, you can link to external
devices. You can trigger the performance of recording or actions by having an
external device operate (turn on or off) the added sensor input pin.
1
Click [Sensor Input] in the tree on the left side of the window.
2
Select the NSR below [Sensor Input].