Filter
Top Products
122
Chapter 5 Settings
3
Click [Add].
The “Sensor Input” screen appears.
4
Configure each item.
Name
Enter a name for the sensor input pin.
Invert
Select this check box to invert the pulse polarity (e.g., when inverting High
t Low to Low t High).
Enable
Select this check box to enable the sensor input pin.
5
After setting each item, click [Save].
The settings are enabled.
To discard your changes and return to the original settings, click [Discard].
Deleting a Sensor Input Pin Created on the NSR
Note
Sensor inputs that exist by default cannot be deleted.
1
Click [Sensor Input] in the tree on the left side of the window.