Open as PDF
installation & connection
22_ installation & connection
1. Attach the installation template to the
selected area and punch 3 holes as shown in
2. Use the 2 supplied screws to fix the camera
to the 2 punched holes.
Set the <FRONT TOP> mark imprinted on the
camera to face the direction of camera monitoring.
3. Connect the camera internal terminal with the
Adjust the lens in a desired direction by
referring to the “Adjusting the monitoring
direction for the camera” section. (page 31)
5. Use the L wrench to assemble the dome
Pay attention to the direction for assembly.