Filter
Top Products
Automatic playback (slide show)
You can play back the images automatically in a slide show fashion. If voice memos are attached,
they can also be heard.
1
Select the still image playback mode (see page 96).
œ An image appears on the LCD monitor.
2
If the Playback Setting Screen appears, press the MODE button to exit it.
œ If the Information Screen appears, press the MODE button to exit it.
3
Press and hold [j] or [l] on the arrow button until
“SLIDESHOW” appears.
œ The Slideshow Screen appears.
œ Select “TIME”, and turn the jog dial to select the time that
each image is shown. Select 1 sec., 4 sec., 7 sec. or 10
sec.
If 1 sec. is selected, any audio recording attached to the
image will not be played back.
œ Select “EFFECT”, and turn the jog dial to select one of
the wipe effects below.
OFF: The images change without any wipe effect.
7: The new image replaces the previous image in a
“wipe” from top to bottom.
6: The image changes from bottom to top.
8: The image changes from the middle to the top and
bottom.
9: The image changes in a mosaic pattern.
4
Select the START indicator, and press the SET button.
œ Slideshow playback begins.
To stop the slide show, press the MODE, SET, or arrow button.
œ “SLIDESHOW END” appears and automatic playback stops.
SLIDESHOW
SELECT
TIME 4S
EFFECT OFF
START
SX511/EX, /E, /U (VPC-AZ1EX, VPC-AZ1E, VPC-AZ1 GB) Thu. Nov., 29/2001
English
100