Filter
Top Products
PLAYING BACK SEQUENTIAL SHOTS
Sequential shot images can be played back one image at a time.
1
Select the sequential shot playback mode (see page 96).
œ If the 9-image display appears, perform step 4 below and then come back to step 2.
2
Press [d] or [c] on the arrow button.
To play back the previous image: Press [d].
To play back the next image: Press [c].
<To use the jog dial>
To play back the previous image: Turn the jog dial counterclockwise.
To play back the next image: Turn the jog dial clockwise.
œ Hold down the arrow button to display the images of the sequential shot one after another
consecutively (consecutive playback). To stop the consecutive playback, release the arrow
button.
œ To change to a different sequential shot, perform steps 3 and 4 below.
œ You can also rotate images for viewing (see page 98).
3
Push the zoom switch towards ;.
œ The 9-image display appears.
4
Use the arrow button to move the y mark to the
desired sequential shot, and press the SET button.
œ The selected sequential shot appears full screen.
Perform step 2 to view the images of the sequential shot.
œ You can also turn the jog dial to move the y mark.
œ Instead of pressing the SET button, you can also enlarge
the image by moving the zoom switch to the O position.
When you have finished viewing the images, turn off the digital camera.
HINT
To display rotated sequential images
œ The sequential shot images can be rotated in the same way that still images are rotated (see
page 98).
To quickly display a different sequential shot
œ In step 2 with the Playback Setting Screen or Information Screen not displayed, press [j] or [l]
to change to the previous or following sequential shot respectively.
0001 0002 0003
0004 0005 0006
0007 0008 0009
Sequential shot folder number
Selecting mark
SX511/EX, /E, /U (VPC-AZ1EX, VPC-AZ1E, VPC-AZ1 GB) Thu. Nov., 29/2001
English
102