Filter
Top Products
REMAINING BATTERY CHARGE INDICATION
NOTE
œ The remaining battery charge indicator will give an accurate indication of the remaining charge
only when the supplied AA nickel metal hydride batteries are used. The indication will not be
accurate if you are using Ni-Cd batteries.
œ For optimum performance, use only Sanyo nickel metal hydride batteries. If you are using Ni-Cd
batteries, the possible operation time will be much shorter.
œ Depending on the usage of the digital camera (such as the number of times the flash is used,
the use of the LCD monitor, etc.) or the environmental conditions (temperature, etc.) the
number of images that can be saved on a set of fully charged batteries will vary greatly.
HELP
If the LCD monitor goes off suddenly
œ When capturing images using the LCD monitor and the battery charge is about half full, the
LCD monitor may turn off momentarily. This is to allow a quick recharge of the flash. When the
flash has been recharged, the LCD monitor will come back on automatically.
SX511/EX, /E, /U (VPC-AZ1EX, VPC-AZ1E, VPC-AZ1 GB) Thu. Nov., 29/2001
49
English