Filter
Top Products
USING THE CAMERA WITH A COMPUTER
When the supplied Sanyo Software Pack (CD-ROM) is installed in your personal computer, the
data in the camera’s card can be copied to the computer and processed. For more information,
please read the Instruction Manual that accompanies the Sanyo Software Pack.
1
Turn off your digital camera (see page 30).
2
Open the terminal cover on the side of the digital camera (see page 21).
3
Using the supplied dedicated USB interface cable, connect the camera connector to
the camera and the computer connector to the proper terminal on your computer.
œ Please connect the dedicated USB interface cable to your computer’s USB connector. Do
not connect it to the USB connector on your monitor or keyboard, or to the USB hub. Be
especially careful when installing the driver software. In some instances, it may not be
possible to correctly install the driver software.
4
Set the selector dial to Ü.
œ When the camera is connected to a personal computer,
you can use the Sanyo Software Pack to copy the data
in the camera’s card to your computer (download).
œ More information about these operations can be found in
the instructions included with the Sanyo Software Pack.
NOTE
œ When your digital camera is connected to a computer, there is no display on the LCD monitor.
To USB port
Dedicated USB interface cable
(supplied)
DIGITAL/AV
terminal
To USB terminal
Selector dial
SX511/EX, /E, /U (VPC-AZ1EX, VPC-AZ1E, VPC-AZ1 GB) Thu. Nov., 29/2001
129
English