Sanyo VPC-AZ1E Digital Camera User Manual


 
3
Plug the power cord into a power outlet (AC 100 to 240 V).
œ Recharge will start automatically.
œ During recharge, the recharge indicator on the battery charger will light.
œ When discharged batteries are inserted, the indicator may flash. When it changes to a
continuously lit indicator, battery recharge is proceeding normally.
œ When the batteries are fully recharged, the recharge indicator goes out.
Recharge time of the supplied nickel metal hydride batteries:
approx. 115 minutes for one or two batteries, and approx. 210 minutes for three or four
batteries.
4
When finished (the recharge indicator turns off),
unplug the power cord from the power outlet.
5
Remove the batteries from the battery charger.
Recharge
indicator
SX511/EX, /E, /U (VPC-AZ1EX, VPC-AZ1E, VPC-AZ1 GB) Thu. Nov., 29/2001
English
24