Filter
Top Products
SETTING THE FOCUS METHOD
You can choose from the following 2 types of autofocus:
Multi-section focus: Subject distance detected by sampling from multiple areas of the entire
shooting screen. This is the initial setting.
Spot focus: The camera focuses on the subject in the center of the LCD monitor.
1
Display the Shooting Setting Screen (see page 31).
2
Select a focus method from the spot focus menu, and
press the SET button.
j: Multi-section focus is used.
i: Spot focus is used.
œ This completes the focus method setting.
œ When the spot focus setting is selected, the focus mark +
appears in the center of the LCD monitor.
NOTE
When the spot focus setting is selected
œ To focus on a specific object, point the camera so that the object matches the focus mark in the
center of the LCD monitor, and press the shutter release button halfway. The camera will focus
on the subject at the focus mark in the center of the LCD monitor. In this condition, compose
the picture and press the shutter release button all the way down to capture the image.
œ It may be difficult to focus if there is little contrast in the subject.
SPOT FOCUS
12
12
3.1
1/30
Focus mark
SX511/EX, /E, /U (VPC-AZ1EX, VPC-AZ1E, VPC-AZ1 GB) Thu. Nov., 29/2001
English
92