Filter
Top Products
SETTING THE EXPOSURE CONTROL
3
Make the setting.
<If aperture and shutter variable program AE Ï is selected>
œ The setting changes to aperture and shutter variable program AE, and the camera returns
to the Shooting Setting Screen.
<If aperture priority AE Î is selected>
œ The display to set the aperture size appears.
œ Turn the jog dial to set the desired aperture size.
<If shutter speed priority AE Ì is selected>
œ The display to set the shutter speed appears.
œ Turn the jog dial to set the desired shutter speed.
<If manual exposure control Í is selected>
œ The display to set the aperture size and shutter speed
appears.
œ Press [j] or [l] on the arrow button to select aperture
size or shutter speed, and turn the jog dial to change the
setting.
4
Press the SET button.
œ This completes the exposure control setting.
œ The display returns to the Shooting Setting Screen.
NOTE
œ A slow shutter speed makes shooting pictures in darker locations possible; however, image
noise may increase.
œ To reduce the noise, set the noise reduction to on.
œ When the manual exposure control mode is set, the AE shift sequential shot method cannot be
selected. Also, when the AE shift sequential shot method is set, the manual exposure control
mode cannot be selected.
œ When the manual exposure control mode is selected, the exposure correction value becomes
±0.
œ Even when shutter speed priority AE Ì or manual exposure control Í is selected and the
shutter speed is set to 1/1000 second, in some cases the shutter speed at the time an image is
captured may not be 1/1000 second. To take a picture with a shutter speed of 1/1000 second,
set the zoom to a wide lens setting and the aperture to its smallest setting.
APARTURE
12
SETTING
5.0
S.SPEED
12
SETTING
1/250
MANUAL
12
SETTING
5.0
1/250
SX511/EX, /E, /U (VPC-AZ1EX, VPC-AZ1E, VPC-AZ1 GB) Thu. Nov., 29/2001
83
English