Filter
Top Products
SETTING THE ISO SENSITIVITY
With the normal settings, the ISO sensitivity is set automatically according to the brightness of the
subject. However, in the special mode, you can fix the ISO sensitivity to the equivalent of 100,
200, or 400.
1
Display the Shooting Setting Screen (see page 31).
2
Select an ISO sensitivity setting from the ISO
sensitivity menu, and press the SET button.
B: Sets the ISO sensitivity automatically (equivalent to
ISO100 to 400).
+: Sets the sensitivity equivalent to ISO100.
1: Sets the sensitivity equivalent to ISO200 (twice the
sensitivity of +).
%: Sets the sensitivity equivalent to ISO400 (four times
the sensitivity of +).
œ This completes the ISO sensitivity setting.
NOTE
œ By setting a higher ISO sensitivity, you can set higher shutter speeds and capture images in
darker locations, but noise in the captured images may increase.
œ If the flicker reduction is set to k (see page 87) in the video clip shooting mode, then the ISO
sensitivity setting is fixed to B.
ISO
12
SX511/EX, /E, /U (VPC-AZ1EX, VPC-AZ1E, VPC-AZ1 GB) Thu. Nov., 29/2001
85
English