Filter
Top Products
4-18
DVW-790WS/709WS/707
DVW-790WSP/709WSP/707P P2V1
Removal
1. Brush Cover Removal
(1) Disconnect the connector on the brush assem-
bly board.
(2) Remove the two screws and the brush cov-
er.
2. Brush Assembly Removal
(1) Remove one of the screws which secures the
brush base as shown in the figure.
(2) Loosen the other screw and move the brush
base in the direction of the arrow.
In this way the brush and slip ring will release.
(3) Remove the screw and the brush assembly.
Brush cover
Brush assembly
Connector
P 2x2
Slip ring
Brush
Remove this screw first.
P 2
x4
Brush base
4-2. Parts Replacement