Filter
Top Products
2-8
DVW-790WS/709WS/707
DVW-790WSP/709WSP/707P P2V1
No. Page Item Setup Description
20 LEVEL 3 SKIN TONE DTL ON/[OFF] Turns ON/OFF the skin tone detail function.
(Same as the TEST OUT on the 1/2 pages of FUNCTION.)
SUPPRESS LEVEL X([0]) Sets signal amount of the skin tone detail.
SKIN TONE DET [OFF]/EXEC Sets to the EXEC position when the range in which skin tone
detail function is automatically set.
(Shoot a skin tone object that fills the entire gate marker on VF,
and press the rotary encoder.)
SATURATION X([0]) Sets the range of color saturation in which the skin tone detail
function works.
HUE X([0])
Sets the range of color hue in which the skin tone detail function works.
WIDTH X([0])
Sets the width of color hue in which the skin tone detail function works.
SKIN AREA IND. ON/[OFF] Turns ON/OFF the function of displaying zebra pattern on VF
indicating the range detecting the skin tone detail.
21 LEVEL 4 MASTER BLACK X([0]) Adjusts the master black level.
MASTER GAMMA X([0]) Adjusts the master gamma correction curve.
MASTER BLACK X([0]) Adjusts the master black gamma.
GAMMA It sets the rise-up of the gamma correction curve.
KNEE POINT X([0])
Adjusts the master knee point level during MANUAL knee adjustment.
KNEE SLOPE X([0])
Adjusts the master knee slope level during MANUAL knee adjustment.
KNEE SATURATION X([0]) Adjusts the knee saturation level.
KNEE [ON]/OFF Turns ON/OFF the knee correction function.
(The DCC switch setting is ignored.)
WHITE CLIP [ON]/OFF Turns ON/OFF the white clip function.
(Used during video signal adjustment.)
Note :
Video signal that exceeds the signal level of 109% or higher
shall not be output even when this setting is set to OFF.
WHITE CLIP LEVEL X([0]) Sets the master white clip level.
22 LEVEL 5 BURST LEVEL X([0]) Sets the burst level of encoder output.
BURST PHASE X([0]) Sets the burst phase of encoder output. (PAL only)
R-Y [ON]/OFF
Turns ON/OFF the function of outputting the R-Y signal to encoder output.
(This function is set to ON automatically when CHROMA is set ON
on 1/2 pages of FUNCTION.)
B-Y [ON]/OFF
Turns ON/OFF the function of outputting the B-Y signal to encoder output.
(This function is set to ON automatically when CHROMA is set ON
on 1/2 pages of FUNCTION.)
R-Y LEVEL X([0]) Sets the R-Y level of encoder output.
B-Y LEVEL X([0]) Sets the B-Y level of encoder output.
Note :
The following items are displayed in DVW-790WS/790WSP/
709WS/709WSP only. The following items are valid when
the 16:9/4:3 MODE on the WIDE SCREEN page is set to 4:3.
R-Y LEVEL (4:3) X([0])
Turns ON/OFF the function of outputting the R-Y signal to encoder output.
B-Y LEVEL (4:3) X([0])
Turns ON/OFF the function of outputting the B-Y signal to encoder output.
23 LEVEL 6 RGB LEVEL X([0]) Sets the video signal level of the RGB output.
RGB SYNC LVL. X([0]) Sets the sync signal level of the RGB output.
RGB SETUP LVL. X([0]) Sets the setup level of the RGB output.
ENC Y LEVEL X([0]) Sets the Y signal level of the encoder output.
ENC SYNC LVL. X([0]) Sets the sync signal level of the encoder output.
ENC SETUP LVL. X([0]) Sets the setup level of the encoder output.
Note :
The following items are displayed in DVW-790WS/790WSP/
709WS/709WSP only. The following items are valid when
the 16:9/4:3 MODE on the WIDE SCREEN page is set to 4:3.
RGB LEVEL (4:3) X([0]) Sets the video signal level of the RGB output.
ENC Y LEVEL (4:3) X([0]) Sets the setup level of the RGB output.
2-1. Service Mode