Filter
Top Products
2-22
DVW-790WS/709WS/707
DVW-790WSP/709WSP/707P P2V1
No. Page Item Setup C RM-P9 RM-B150 F-SET C-SET Remark
9 SHUTTER EVS YES P P ON
CLS YES P P ON
1/100(NTSC) YES P P ON
1/60(PAL)
1/125 YES P P ON
1/250 YES P P ON
1/500 YES P P ON
1/1000 YES P P ON
1/2000 YES P P ON
10 !’ LED MASTER GAIN YES M M ON
SHUTTER ON YES M M ON
WHITE PRESET YES M M OFF
ATW RUN YES M M OFF
EXTENDER ON YES M M ON
FILTER 2,3,4 YES M M OFF
FILTER A,C,D YES M M OFF DVW-790WS/790WSP/
709W/709WSP only
A.IRIS OVERRIDE YES M M OFF
11 SETUP CARD READ (→ CAM) M M
WRITE (→ CARD) M M
ID EDIT M M
WRITE PROTECT M M OFF
WHITE DATA M M OFF
12 FUNCTION 1/2 TEST OUT NO M M ENC
DETAIL YES M M ON
APERTURE YES M M ON
SKIN TONE DTL YES M M OFF
MATRIX YES M M OFF (J)
ON (except J)
GAMMA YES M M ON
BLACK GAMMA YES M M OFF
CHROMA YES M M ON
TEST SAW YES P
(*2)
P/M
(*3)
OFF
CROSS COLOR FLT YES M M OFF
13 FUNCTION 2/2 GENLOCK YES M M ON
CAM RET. YES M M OFF
FILTER INH. YES M M OFF
FIELD/FRAME YES M M FIELD
A.IRIS OVERRIDE YES P P OFF
DCC FUNCTION SEL YES M M DCC
REAR BNC OUT YES M M VBS
When BKDW-702 is installed.
VTR MODE YES M M OFF
REC INHIBIT (CCU) YES M M ON
ASSIGNABLE SW YES M M OFF
*2 : It can be set from the setup menu. However, if the setup menu and the adjustment control of the RM-P9 are used at the same time, the setup value may
not be reflected correctly.
*3 : However, the adjustment items that are set to the absolute mode by the RM configuration menu and the TEST signal output ON/OFF , cannot be changed
from the setup menu if RM-B150 is set to the panel-active.
2-1. Service Mode