Filter
Top Products
7-2
DVW-790WS/709WS/707
DVW-790WSP/709WSP/707P P2V1
Initial Setting
Before performing adjustment, set switches as follows, If the setting of the GAIN switch is changed from
the factory set value, reset it to its original value by referring to the operation manual.
Inside panel :
VTR SAVE/STBY switch → STBY
GAIN switch → L (0 dB)
OUTPUT/DCC switch → CAM/OFF
MENU ON/OFF/PAGE switch → OFF
WHITE BAL switch → PRST
Front panel :
SHUTTER switch → OFF
Filter selector → 1B
Lens :
LENS → MANU
IRIS → C (CLOSE)
Setup menu :
. S06*MASTER GAIN
LOW → 0 dB
MID → 9 dB
HIGH → 18 dB
. S12*FUNCTION 1/2
TEST OUT → ENC
DETAIL → ON
APERTURE → ON
SKIN TONE DETAIL → OFF
MATRIX → ON
GAMMA → ON
BLACK GAMMA → OFF
TEST SAW → OFF
CHROMA → ON
CROSS COLOR FLT. → OFF (NTSC only)
. S13*FUNCTION 2/2
GENLOCK → ON
CAM RET → OFF
FILTER INHBIT → OFF
. S21*LEVEL 4
KNEE SATURATION → 0
KNEE → ON
WHITE CLIP → ON
. S22*LEVEL 5
R-Y → ON
B-Y → ON
7-1. General Information for Electrical Adjustment