Filter
Top Products
4-101
DVW-790WS/709WS/707 P2V1
DVW-790WSP/709WSP/707P P2V1
4-2. Parts Replacement
24. Connection the Brush Assembly Connector
Connect the connector to the brush assembly board.
25. Video Head Cleaner Installation
Put the video head cleaner bracket of the video head cleaner onto the surface of the unit using a pair of
tweezers and tighten the screw.
26. Cassette Guide Installation
Attach the cassette guide using the two screws.
27. Cleaning of the Head and the Tape Running Surface
Clean the following areas using a cleaning cloth moistened with cleaning fluid.
. Video head
. Tape running surface of the upper drum
. Tape running surface and lead of the lower drum
. All tape guides and pinch roller
n
After cleaning, be sure to wipe the relevant areas using a dry cleaning cloth.
Adjustments After Replacement
28. Tension Regulator Operating Position Adjustment
(Refer to section 4-3-1.)
29. FWD Back Tension Adjustment
(Refer to section 4-3-2.)
30. Tape Running Adjustment
(Refer to section 5-1.)