Filter
Top Products
2-28
DVW-790WS/709WS/707
DVW-790WSP/709WSP/707P P2V1
No. Page Item Setup C RM-P9 RM-B150 F-SET C-SET Remark
43 MENU SEL. 2 Setup CARD YES M M ON
FUNCTION 1/2 YES M M OFF
FUNCTION 2/2 YES M M OFF
VF SETTING YES M M OFF
WIDE SCREEN YES M M OFF DVW-790WS/790WSP/
709WS/709WSP only
LEVEL 1<Detail> YES M M OFF
LEVEL 2<Detail> YES M M OFF
LEVEL 1<4:3DTL> YES M M OFF
LEVEL 2<4:3DTL> YES M M OFF
44 MENU SEL. 3 LEVEL 3<SKnDTL> YES M M OFF
LEVEL 4<Knee> YES M M OFF
LEVEL 5<AdjENC> YES M M OFF
LEVEL 6<AdjENC> YES M M OFF
LEVEL 7<BlkFlr> YES M M OFF
LEVEL 8<Gamma> YES M M OFF
LEVEL 9<Matrix> YES M M OFF
LEVEL 10<Matrix> YES M M OFF
LEVEL 11<SC-H> YES M M OFF
LEVEL 12<A.Iris> YES M M OFF
45 MENU SEL. 4 W-SHADING G YES M M OFF
W-SHADING R YES M M OFF
W-SHADING B YES M M OFF
DCC ADJ. YES M M OFF
OFFSET WHT YES M M OFF
PRESET WHT YES M M OFF
OPERATION 1 YES M M OFF
OPERATION 2 YES M M ON
FRM SHUTTER YES M M OFF
46 MENU SEL. 5 SG ADJ. YES M M OFF
ENC ADJ. YES M M OFF
DATA RESET YES M M OFF
CAMERAMAN 1-5 YES M M ON
47 MEASUREMENT S/N M M OFF
MODULATION M M OFF
RESOLUTION M M OFF
SENSITIVITY M M OFF
REGISTRATION M M OFF
MASTER BLACK YES P
(*2)
P/M
(*3)
0
TEST OUT M M ENC
*2 : It can be set from the setup menu. However, if the setup menu and the adjustment control of the RM-P9 are used at the same time, the setup value may
not be reflected correctly.
*3 : However, the adjustment items that are set to the absolute mode by the RM configuration menu and the TEST signal output ON/OFF , cannot be changed
from the setup menu if RM-B150 is set to the panel-active.
2-1. Service Mode