Filter
Top Products
4-115
DVW-790WS/709WS/707 P2V1
DVW-790WSP/709WSP/707P P2V1
4-2. Parts Replacement
Adjustment After Replacement
3. Tape Guide Height Adjustment
(1) Set a tape (any available on the market) into
the PLAY state and adjust the height of the
tape guide so that it satisfies specification 1.
Specification1:
(A) S5 guide and T3 guide
The tape should run without touching the upper and lower flanges.
(See the figure.)
(B) Tension regulator (S4) guide
The tape should run touching the upper flange.
(C) S3 guide
The tape should run without projecting out of the roller.
(D) S2 guide
The tape should run touching the upper flange.
(E) T2 guide
The tape should run touching the upper flange.
If the tape curls for any of the guides, this is allowed up to 1/10 of the tape
width.
m
n
m
n
3
2
2
3
=
to
Tape
S5/T3 guide