Filter
Top Products
4-116
DVW-790WS/709WS/707 P2V1
DVW-790WSP/709WSP/707P P2V1
4-2. Parts Replacement
(2) While holding the screwdriver so that the up-
per flange does not rotate, set the torque
screwdriver against the plus screw of the lock
knob shown in the figure and tighten the lock-
ing screw.
The standard tightening torque value :
9 x 10
_2
N.m {0.9 kgf.cm}
4. Tape Running Adjustment
Perform the tape running adjustment.
(Refer to section 5-1.)
Torque screwdriver
Rocking-konb
Screwdriver-knob
Upward
Downward