Filter
Top Products
5-16
DVW-790WS/709WS/707
DVW-790WSP/709WSP/707P P2V1
5-3. CTL Head Height Adjustment
Tools
. TP tool : J-6420-910-A
. Alignment tape, ZR2-1 (NTSC) : 8-960-073-11
. Alignment tape, ZR2-1P (PAL) : 8-960-073-61
. Box screwdriver
. Oscilloscope
Setting
1. Turn the power on.
2. Connect the 8-pin connector of the TP tool to the connector CN7 on the HN-260 board.
3. Connect the 5-pin connector of the TP tool to the connector CN3 on the CTL-10 board.
4. Set the switches S1-1 and S1-2 on the HN-260 board to OFF.
5. Connect an oscilloscope.
CH-1: PB CTL/TP tool
TRIG: SV REF CF/TP tool
6. Turn the power on.
7. Insert the alignment tape ZR2-1/P.
5-3. CTL Head Height Adjustment