Filter
Top Products
5-7
DVW-790WS/709WS/707
DVW-790WSP/709WSP/707P P2V1
T2 tape guide
T1 tape guide
Drum assembly
Slip ring
Drum lead
Pinch roller
CUE/TC head
Capstan
T drawer guide
T3 tape guide
Tape top sensor
Tape runs in contact with the upper flange
CUE/TC head
Tape
Drum lead
Capstan
T drawer guide
Drum Exit Side
Checks
1. PLAY Mode
(Playing back the tape top)
Enter the play mode at the tape top of ZR2-1/P
(from 5 minute to 10 minute segment).
Check that the tape running conditions satisfy the
specifications 4.
If the specifications 4 is not satisfied, perform step
9 and higher.
2. F FWD Mode
(Fast forward at tape top)
Enter the F FWD mode at the tape top of ZR2-1/P
(from 5 minute to 10 minute segment).
Check that the tape running conditions satisfy the
specifications 4.
If the specifications 4 is not satisfied, perform step
9 and higher.
3. REW Mode (Rewind at tape top)
Enter the REW mode at the tape top of ZR2-1/P
(from 5 minute to 10 minute segment).
Check that the tape running conditions satisfy the
specifications 4.
If the specifications 4 is not satisfied, perform step
9 and higher.
4. PLAY Mode (Playback at tape end)
Enter the PLAY mode at the tape end of BCT-
D40 (from 30 minute to 40 minute segment).
Check that the tape running conditions satisfy the
specifications 4.
If the specifications 4 is not satisfied, perform step
9 and higher.
Drum Exit Side (Threading End Mode)
5-1. Tape Running Adjustment
Specifications 4:
(A) T2 guide
Tape runs in contact with the upper flange.
Acceptable range of the tape curl is 1/10 or less of a tape width.
(B) T3 guide
Tape runs not in contact with upper and lower flanges.
(C) Drum lead
Tape runs in contact with the drum lead and without any curl.