Filter
Top Products
5-20
DVW-790WS/709WS/707
DVW-790WSP/709WSP/707P P2V1
5-5. CUE Head Height Adjustment
5-5. CUE Head Height Adjustment
Notes
. The CUE head height adjustment is closely related to the azimuth, zenith and position adjustments of
the CUE head.
. After carrying out the CUE head height adjustment, be sure to carry out the other adjustments or checks
of the CUE head.
Tools
. Alignment tape, ZR2-1 (NTSC) : 8-960-073-11
. Alignment tape, ZR2-1P (PAL) : 8-960-073-61
. TP tool : J-6420-910-A
. Box screwdriver
. Oscilloscope
Setting
1. Turn the power off.
2. Connect the 8-pin connector of the TP tool to the connector CN7 on the HN-260 board.
3. Connect the 5-pin connector of the TP tool to the connector CN3 on the CTL-10 board.
4. Select the switches S1-1 and S1-2 on the HN-260 board to the OFF.
5. Connect an oscilloscope.
CH-1 : PB CUE/TP tool
6. Turn the power on.
7. Insert the alignment tape ZR2-1/P.