Filter
Top Products
Menu List
128
Chapter 6 Menu Displays and Detailed Settings
Tips
• The bold-faced numbers designate the pages that have been registered in the USER menu at the factory.
• The following lists include items and settings that appear only when an option board or separately sold
software is installed.
• The bold-faced settings are the factory default settings.
• The initial value of items with a setting range of –99 to 99 is 0.
• When the setup value in the Settings column is surrounded by parentheses ( ), the value is a relative
value. The setting range shown on the menu screen may differ from what is shown in the manual.
Menu List
OPERATION menu
No. Page Item Settings Description
01 OUTPUT 1 SDI OUT 1 SELECT OFF/HDSDI/SDSDI Selects the output signal from the
SDI OUT 1 connector.
SDI OUT 2 SELECT OFF/HDSDI/SDSDI Selects the output signal from the
SDI OUT 2 connector.
SDI OUT 2 SUPER OFF/ON Sets the superimposed
information output from the SDI
OUT 2 connector.
TEST OUT SELECT VBS/Y/R/G/B/LCD Selects the output signal from the
TEST OUT connector.
Note
When R, G, or B is selected, turning
the power of the unit off and on
changes the setting to Y.
TEST OUT SUPER OFF/ON Sets the superimposed
information output from the
TEST OUT connector.
Notes
• Regardless of this setting, text
data is output from this connector
when the setting of TEST OUT
SELECT is Y, R, G, or B. During
the display of text data, you can
hide the text data by switching
this item from ON to OFF. (It is
also hidden in the viewfinder.)
• When TEST OUT SELECT is set
to LCD, the mode selected with
the DISP SEL/EXPAND button
determines whether text is
displayed or hidden.