Filter
Top Products
Menu List
141
Chapter 6 Menu Displays and Detailed Settings
05 BLACK
GAMMA
BLACK GAMMA OFF/ON Turns the black gamma
correction on or off.
BLACK GAM RANGE LOW/L.MID/H.MID/
HIGH
Sets the range affected by black
gamma.
MASTER BLK
GAMMA
(–99 to 99) Adjusts the master black gamma.
R BLACK GAMMA (–99 to 99) Sets the correction curve of the R
black gamma.
G BLACK GAMMA (–99 to 99) Sets the correction curve of the G
black gamma.
B BLACK GAMMA (–99 to 99) Sets the correction curve of the B
black gamma.
TEST OUT SELECT VBS/Y/R/G/B/LCD Selects the output signal of TEST
OUT connector.
06 KNEE KNEE OFF/ON Turns the knee correction circuit
on or off.
KNEE POINT 50.0% to 95.0% to
109.0%
Sets the knee point level.
KNEE SLOPE (–99 to 99) Set the knee slope level.
KNEE SATURATION OFF/ON Turns the knee saturation
function on or off.
KNEE SAT LEVEL (–99 to 99) Sets the knee saturation level.
WHITE CLIP OFF/ON Turns the white clipping function
on or off.
WHITE CLIP LEVEL NTSC: 90.0% to
108.0% to 109.0%
PAL: 90.0% to 105.0%
to 109.0%
Adjusts the white clipping level.
07 DETAIL 1 DETAIL OFF/ON Sets the detail correction function
on or off.
APERTURE OFF/ON Turns the aperture correction
function on or off.
DETAIL LEVEL (–99 to 99) Sets the general level of the detail
signal.
APERTURE LEVEL (–99 to 99) Sets the aperture correction level.
DTL H/V RATIO (–99 to 99) Sets the level of the V detail
signal.
CRISPENING (–99 to 99) Sets the crispening level.
LEVEL DEPEND OFF/ON Turns the level depend function
on or off.
LEVEL DEPEND LVL (–99 to 99) Sets the level of the level depend.
DETAIL FREQUENCY (–99 to 99) Sets the frequency of the H detail
signal.
No. Page Item Settings Description