Filter
Top Products
Locations and Functions of Parts and Controls
32
Chapter 1 Overview
are being changed, during adjustment, and after
adjustment.
For details about the display item selection, see
“Selecting the display items” on page 171.
For details about setting change and adjustment
progress messages, see “Change confirmation/
adjustment progress messages” on page 172.
For details about marker display, see “Setting the
marker display” on page 173.
All items that can be displayed on the viewfinder
screen are shown below.
a Color temperature
Displays a color temperature calculated from the
gain of R and B, in the range 0.0 K to 99.9 K (in
steps of 0.1 K). The +/– signs may be displayed
depending on the OFFSET WHT setting (see
page 182).
No display: OFFSET WHT is OFF
+: The value of OFFSET WHT is greater than
3200K.
–: The value of OFFSET WHT is less than
3200K.
b Video format
Indicates the format of video being currently
played back or recorded (see page 54).
The video aspect ratio (16:9 or 4:3) can also be
displayed when the recording format is set to
IMX 50, IMX 40, IMX 30, or DVCAM.
c Extender
Displays the extender settings of this unit and the
lens.
EX: The lens extender is on.
08: The lens shrinker is on.
x2D: This unit’s extender function is on.
Ex2D: The lens extender and the digital extender
function of this unit are both on.
d Zoom position
Indicates the zoom position of the zoom lens in
the range from 0 to 99.
e Clip information
Displays clip information during playback.
During clip playback and search (when title
display is off): Displays the clip number and
total number of clips.
During clip playback and search (when title
display is on): Displays the title specified in
planning metadata as the clip name,
according to the setting of Planning Clip
Name in Clip Info. Area in the Disc Menu
(see page 123).
During clip list playback: Displays the name of
the clip list, the sub clip number, and the total
number of sub clips.
f Wireless microphone reception level
When a UHF portable tuner is installed in the
camcorder, “W” appears together with four-
segment reception level indicators for each of the
channels (1 or 2 channels) that can be used by the
tuner. The indications are as follows.
Normal use: The number of white segments
indicates the strength of the signal level.
Muted: The number of gray segments indicates
the strength of the signal level.
Reception level over peak: “P” is displayed
instead of the indicators.
1)
Tuner battery is low: The channel number and
indicator of the corresponding channel
flash.
1)
1)DWR-S01D only
g Power source voltage/battery
remaining capacity
When the unit is powered from a battery pack,
indicates the remaining capacity of the power
source voltage. When the unit is powered from a
battery connected to the DC IN connector or AC
adaptor attached to the battery attachment shoe,
indicates the power source voltage.
h External battery
Appears if the power is supplied from an AC
adaptor connected to the DC IN connector.
123 4 5 6 78
90q
a
q
s
q
d
q
f
q
g
q
h
q
j
w
;
q
l
q
k
w
s
w
a
EX Z W
13.4
V
99 1 2
HD422 50 E0001:004/004 DC IN
13.9
K+
WHITE:NG
LEVEL TOO HIGH EXT
REC2 TCG 01:23:45:15 HDSDI
1 -
125
C
LOW LIGHT
5600
F1.718 35 30dB 1/ 2000
1
2
W:A