Filter
Top Products
Operation Warnings
221
Chapter 9 Maintenance
Alarm messages during thumbnail
search, scene selection, and clip list
operations
An alarm message may appear in the LCD
monitor during thumbnail search, scene selection,
and clip list operations. In that case, take the
action indicated in the following table.
Cannot
Expand Clip
any Further.
The clip cannot be expanded into
more blocks. This alarm appears
when the DISP SEL/EXPAND
button is pressed when the number
of blocks is maximum, or when
the duration of an expanded
thumbnail is one frame.
Selected
Essence Mark
Does not
Exist.
The selected essence mark does
not exist.
This alarm appears in the essence
mark selection screen when the
specified essence mark does not
exist on the disc.
Sub Clip is
Invalid. Set
Appropriate
IN/OUT
Points.
The temporal relationship between
the specified In and Out points in a
TRIM operation (see page 117) is
not correct. Reset so that the value
of the Out point timecode is larger
than the value of the In point
timecode.
Duration of
One Clip List
must be Less
than 24
Hours.
The total duration of the current
clip list exceeds the upper limit of
24 hours as the result of an Add
Sub Clips (see page 115) or Trim
Sub Clip (see page 117) operation.
No More Sub
Clips can be
Added to the
Clip List.
The total number of the sub clips
of the current clip list exceeds the
upper limit of 300 as the result of
an Add Sub Clips (see page 115)
or Trim Sub Clip (see page 117)
operation.
Sub Clip does
not Exist.
An attempt is made to execute a
Move Sub Clips (see page 116),
Trim Sub Clip (see page 117),
Delete Sub Clips (see page 117),
or Set Start Time Code (see
page 118) operation with no sub
clips in the current clip list.
Clip List does
not Exist.
An attempt is made to execute a
Delete Clip List operation (see
page 120) when there are no clip
lists on the disc.
Move is
Invalid.
An attempt is made to execute a
Move Sub Clips operation (see
page 116) when there are no sub
clip in the current clip list, or when
there is only one.
Shot Mark
does not
Exist.
An attempt is made to execute a
Delete Shot Mark (see page 106)
operation on a clip with no shot
marks recorded in.
Chapter does
not Exist.
An attempt was made to display a
nonexistent chapter.
Rec Start
cannot be
Deleted.
An attempt is made to delete a Rec
Start with a Delete Shot Mark
operation. Only Shot Mark1 and
Shot Mark2 essence marks can be
deleted.
Rec Start
cannot be
Moved.
An attempt was made to move a
Rec Start essence mark with a
Move Shot Mark operation. Only
Shot Mark1 and Shot Mark2
essence marks can be moved.
Command
Disabled.
An attempt was made to execute
the Format Disc command with
Disable “Format Disc” set to
“Disable”.
Clip is
Locked.
An attempt is made to delete a
clip, set the clip thumbnail, or
delete a shot mark when the clip is
locked.
All Clips are
Locked.
An attempt is made to execute a
Lock All Clips operation when all
clips are already locked.
All Clips are
Unlocked.
An attempt is made to execute an
Unlock All Clips operation when
all clips are already unlocked.
A File with
the Name you
Specified
Already
Exists.
Specify a
Different
Name.
A file name that was specified in a
Set Clip Name operation already
exists.
Set NAMING
FORM to
“free”
An attempt was made to rename a
clip with Set Clip Name when
NAMING FORM is not set to
“FREE” (see page 91).