Filter
Top Products
Operation Warnings
216
Chapter 9 Maintenance
Warning messages
Error**-**
a)
Warning
indication
State WARNING
indicator
Warning sound REC/TALLY BATT
——
—
Problem VDR operation Action to take
Recording error Recording stops. Turn off the power and
consult a Sony service
representative.
MEM Full!
Warning
indication
State WARNING
indicator
Warning sound REC/TALLY BATT
——
b)
b)
b)
—
Problem VDR operation Action to take
Shockproof memory overflow Recording continues but may be
substandard.
Protect the unit from shocks
and vibrations.
ILL REC!
Warning
indication
State WARNING
indicator
Warning sound REC/TALLY BATT
——
b)
b)
b)
—
Problem VDR operation Action to take
Input sync error Recording continues but may be
substandard.
Turn off the power and
contact a Sony service
representative. (This
indication may be given
momentarily when a
GENLOCK signal is
connected or disconnected,
but this does not indicate a
problem.)
Verify ERR!
Warning
indication
State WARNING
indicator
Warning sound REC/TALLY BATT
——
b)
b)
b)
—
Problem VDR operation Action to take
An error was detected in the
signals recorded on the disc.
Recording continues but may be
substandard.
Exchange the disc.
Cache Full!
Warning
indication
State WARNING
indicator
Warning sound REC/TALLY BATT
——
b)
—
b)
—
Problem VDR operation Action to take
Cache memory became full
during a Disc Exchange Change
mode operation.
Video and audio recording may be
interrupted.
Exchange the disc quickly.