Filter
Top Products
Adjustments and Settings From Menus
178
Chapter 6 Menu Displays and Detailed Settings
3 Turn the MENU knob to select the gain
value, and press MENU knob.
Any of –6, –3, 0, 3, 6, 9, 12, 18, 24, 30, 36 or
42 dB can be set for each of the L, M, H, and
TURBO positions, in any sequence.
4 Repeat steps 2 and 3 until you have set
all of the desired items.
(How to select an item in the menu screen: Turn
the MENU knob to move b to the desired item.)
1 Display the OUTPUT 1 page of the
OPERATION menu, and press the
MENU knob.
For details on menu operations, see “Basic
menu operations” on page 163.
2 Select the desired item, and press the
MENU knob.
You can set the following items on the
OUTPUT 1 page.
3 Turn the MENU knob to change the
setting, and press the MENU knob.
4 Repeat steps 2 and 3 until you have set
all of the desired items.
You can assign the desired function to any of the
ASSIGN switches.
(How to select an item in the menu screen: Turn
the MENU knob to move b to the desired item.)
1 Display the ASSIGNABLE page of the
OPERATION menu, and press the
MENU knob.
TURBO
SW IND
OFF: When you operate the
GAIN selector after
pressing the button to which
the TURBO GAIN function
has been assigned once, the
video gain is changed
according to the GAIN
selector operation.
ON: When the video gain is
boosted to the video gain to
the value preset by pressing
the button to which the
TURBO GAIN function has
been assigned once, the
video gain is not changed
even if you operate the
GAIN selector, until you
press the button once more.
SHOCK-
LESS
GAIN
Turns shockless gain on or off.
Selecting the output signals
Item Description
Item Setting
SDI OUT 1
SELECT
Selects the signal output from
the SDI OUT1 connector.
OFF: Do not output video.
HD-SDI: Output HD-SDI.
SD-SDI: Output SD-SDI
SDI OUT 2
SELECT
Selects the signal output from
the SDI OUT2 connector.
OFF: Do not output video.
HD-SDI: Output HD-SDI.
SD-SDI: Output SD-SDI
SDI OUT 2
SUPER
Selects whether to superimpose
(ON) or not superimpose (OFF)
text information on the signal
output from the SDI OUT2
connector.
TEST OUT
SELECT
Selects the output signal from
the TEST OUT connector.
VBS: Output composite video
signal. When you select
VBS, connect to the
VIDEO IN connector of
your monitor.
Y: Output HD-Y signal.
R/G/B: Output HD RGB
signal.
LCD: Output a signal like the
display in the LCD
monitor.
TEST OUT
SUPER
Selects whether to superimpose
(ON) or not superimpose (OFF)
text information on the signal
output from the TEST OUT
connector.
Assigning functions to ASSIGN
switches