Filter
Top Products
Menu List
142
Chapter 6 Menu Displays and Detailed Settings
08 DETAIL 2 KNEE APERTURE OFF/ON Turns the knee aperture function
on or off.
KNEE APT LVL (–99 to 99) Sets the knee aperture level.
DETAIL LIMIT (–99 to 99) Sets the both detail black and
white limiters.
DTL WHT LMT (–99 to 99) Sets the detail white limiter.
DTL BLK LMT (–99 to 99) Sets the detail black limiter.
DTL V-BLK LMT (–99 to 99) Sets the V detail black limiter.
V DTL CREATION NAM/G/R+G/Y Selects the source signal of the V
DTL signal.
H/V CONTROL MODE H/V/V Selects the operation mode of
DTL H/V RATIO on the
DETAIL 1 page.
H/V: H and V increase and
decrease in inverse
proportion
V: V DTL only enabled
09 SD DETAIL SD DETAIL OFF/ON Turns the SD detail correction on
or off.
SD DETAIL LEVEL (–99 to 99) Sets the general level of the SD
detail signal.
SD CRISPENING (–99 to 99) Sets the SD crispening level.
SD DTL WHT LIMIT (–99 to 99) Sets the SD detail white limiter.
SD DTL BLK LIMIT (–99 to 99) Sets the SD detail black limiter.
SD LEVEL DEPEND OFF/ON Turns the SD level depend
function on or off.
SD LV DEPEND LVL (–99 to 99) Sets the level of the SD level
depend.
SD DTL FREQUENCY (–99 to 99) Sets the frequency of the SD H
detail signal.
SD DTL H/V RATIO (–99 to 99) Sets the level of the SD V detail
signal.
SD CROSS COLOR
(When NTSC(J)AREA
or NTSC AREA is
selected on the
FORMAT page)
(–99 to 99) Sets the SD cross color reduction
level.
No. Page Item Settings Description