Filter
Top Products
Menu List
155
Chapter 6 Menu Displays and Detailed Settings
16 DCC ADJUST DCC FUNCTION
SEL
DCC/FIX Enables or disables automatic knee point
adjustment when the OUTPUT/DCC switch is set
to CAM, DCC: ON.
DCC: Automatically adjust the knee point
according to the luminance of the subject.
FIX: Set the knee point to a fixed value.
DCC D RANGE 400%/450%/
500%/550%/
600%
Sets the dynamic range when the OUTPUT/DCC
switch is set to CAM, DCC: ON.
DCC POINT (–99 to 99) Adjusts the DCC minimum knee point.
DCC GAIN (–99 to 99) Adjusts the gain to DCC detected value.
DCC DELAY
TIME
(–99 to 99) Adjusts the DCC reaction speed.
DCC PEAK
FILTER
(–99 to 99) Adjusts the response sensitivity to the peak of the
DCC detected value.
17 AUTO IRIS 2 IRIS WINDOW 1/2/3/4/5/6/VAR Selects the auto iris detection window.
VAR: variable
IRIS WINDOW
IND
OFF/ON Turns on and off the function which displays a
frame marker for the auto iris detection window.
IRIS LEVEL (–99 to 99) Adjusts the level of the auto iris target value.
IRIS APL RATIO (–99 to 99) Adjusts the mix ratio of auto iris detection peak
value and average value.
IRIS VAR WIDTH 20 to 240 to 479 Adjusts the width of detection frame when the auto
iris detection window is set to VAR.
IRIS VAR
HEIGHT
20 to 135 to 269 Adjusts the height of detection frame when the
auto iris detection window is set to VAR.
IRIS VAR H POS –460 to 0 to 459 Adjusts the horizontal position of detection frame
when the auto iris detection window is set to VAR.
IRIS VAR V POS –250 to 0 to 249 Adjusts the vertical position of detection frame
when the auto iris detection window is set to VAR.
IRIS SPEED (–99 to 99) Adjusts the auto iris speed.
CLIP HIGH
LIGHT
OFF/ON Turns on and off the function which, during auto
iris adjustment, ignores very bright areas by dulling
the reaction to high luminescence.
18 GENLOCK GENLOCK OFF/ON Turns genlock on and off.
GL HD H PHASE (–99 to 99) Sets the HD output H phase for genlock operation.
GL SD H PHASE (–99 to 99) Sets the SD output H phase for genlock operation.
REFERENCE INTERNAL/
GENLOCK/
SDI IN
Displays the type of reference signal used by this
unit.
19 ND COMP ND OFFSET
ADJUST
OFF/ON Turns on and off the mode which sets ND (neutral
density) filter color compensation values.
CLEAR ND
OFFSET
EXEC Clear ND filter color compensation values.
No. Page Item Settings Description