Filter
Top Products
Menu List
156
Chapter 6 Menu Displays and Detailed Settings
20 AUTO
SHADING
AUTO BLK
SHADING
EXEC Executes the auto black shading correction
function.
RESET BLK SHD EXEC Clear black shading compensation values.
TEST OUT
SELECT
VBS/Y/R/G/B/
LCD
Selects the signal output of the TEST OUT
connector.
MASTER
GAIN(TMP)
–6dB/–3dB/0dB/
3dB/6dB/9dB/
12dB/18dB/
24dB/30dB/
36dB/42dB
Temporarily sets the master gain value.
21 APR APR EXEC Suppresses white flecks by executing the automatic
pixel noise reduction function.
APR(SLS) EXEC Suppresses white flecks in SLS (Slow Speed
Shutter) mode by executing the automatic pixel
noise reduction function.
Note
The execution time for this function is about 30
minutes. More time may be required when
temperatures inside the unit are low.
APR PRESET EXEC Deletes white flecks data that was added by
execution of the APR and automatic black balance
adjustment functions.
22 NETWORK DHCP ENABLE/
DISABLE
Selects whether to enable automatic acquisition of
the IP address from a DHCP server.
IP ADDRESS xxx.xxx.xxx.xxx
192.168.1.10
Sets the IP address.
SUBNET MASK xxx.xxx.xxx.xxx
255.255.255.0
Sets the subnet mask.
DEF.GATEWAY xxx.xxx.xxx.xxx
0.0.0.0
Sets the default gateway.
LINK SPEED AUTO/10Mbps/
100Mbps
Sets the communications speed.
DUPLEX AUTO/FULL/
HALF
Sets the duplex mode.
No. Page Item Settings Description