Filter
Top Products
Saving and Loading Scene Files
189
Chapter 7 Saving and Loading User Setting Data
(How to select an item in the menu screen: Turn
the MENU knob to move b to the desired item.)
1 Display the USER FILE page of the
FILE menu, and press the MENU knob.
For details on menu operations, see “Basic
menu operations” on page 163.
2 Select USER PRESET, and press the
MENU knob.
You can save various settings for shooting a
particular scene as a scene file. By loading the
scene file, you can quickly recreate setup
conditions suitable for the scene. You can save up
to five scene files in the camcorder memory and
up to 100 scene files in a “Memory Stick” .
You can also load data from the “Memory Stick”
into the camcorder memory.
Data that can be saved in a scene file
You can save the following data in a scene file:
• Values adjusted using the PAINT menu
• Shutter speed settings made in the standard
mode and ECS mode
• The white balance data included in a scene file
depends on the SCENE WHITE DATA setting
on the REFERENCE page of the FILE menu.
To save a scene file to the “Memory Stick”, insert
the “Memory Stick” into the “Memory Stick” slot
before starting the following operation.
(How to select an item in the menu screen: Turn
the MENU knob to move b to the desired item.)
1 Display the SCENE FILE page of the
FILE menu, and press the MENU knob.
For details on menu operation, see “Basic menu
operations” on page 163.
To set a file ID for the data to be saved
Set the file ID before going to step 2.
For details on setting the file ID, see “To set the
file ID” on page 187.
Error
message
Cause Action
NO
MEMORY
STICK
(flashing)
No “Memory
Stick” is
inserted.
Insert or reinsert
the “Memory
Stick”.
MEMORY
STICK
ERROR
(flashing)
Circuit or
“Memory Stick”
fault.
Recheck, and
consult a Sony
service
representative.
FILE
ERROR
(flashing)
The “Memory
Stick” contains
data that cannot
be loaded into
this camcorder.
Data saved to a
“Memory Stick”
using a
camcorder
whose model is
not the same as
this camcorder
cannot be loaded
into this
camcorder.
Returning the user file settings to
the standard settings
Saving and Loading
Scene Files
Saving a scene file
s
1 :STANDARD
s
2 :STANDARD
s
3 :STANDARD
s
4 :STANDARD
s
5 :STANDARD
s
STANDARD
SCENE RECALL : EXEC
SCENE STORE : EXEC
F.ID: STANDARD
TOP?F04 SCENE FILE