Filter
Top Products
Menu List
153
Chapter 6 Menu Displays and Detailed Settings
12 CAM
CONFIG 1
REC TALLY
BLINK
OFF/ON Turns the tally illumination control on or off when
the battery is almost exhausted or the disc is almost
full.
REC START
BEEP
OFF/ON Turns on or off the REC START/STOP alarm
sound.
SUB LCD MODE
SEL
TIMER/OFF/
CONT
Sets the timecode (TC) display after poweroff as
follows.
TIMER: The TC display turns off after the elapse
of the time set by the SUB LCD TIMER
below.
OFF: Not displayed.
CONT: Displayed.
SUB LCD TIMER 1H/3H/8H Sets the duration of time after which the TC
display is to be turned off after power-off, when the
SUB LCD MODE SEL item, above, is set to
“TIMER” (H: hours).
HDSDI REMOTE
I/F
OFF/CHARA/
G-TLY/R-TLY
Selects whether to use the function that enables
recording control from this unit of an external
device connected to the SDI OUT 1/2 connectors
(HDSDI output) of this unit.
g)
Also selects the
indication that shows whether the external device is
recording.
OFF: Do not use the remote recording control
function.
CHARA: Use the function, and indicate by the
controlling external device indicator in the
viewfinder (see page 33).
G-TLY: Use the function, and indicate by the
TALLY indicator in the viewfinder.
R-TLY: Use the function, and indicate by the REC
(recording, red tally) indicator in the
viewfinder.
Note
When R-TLY is selected, the REC indicator lights even
when the unit is not recording.
PROAV DISPLAY DSABL/ENABL Specifies whether to display the PROAV folder
when this unit is accessed by a FAM/FTP
connection.
DSABL: Do not display.
ENABL: Display.
No. Page Item Settings Description