Filter
Top Products
Menu List
152
Chapter 6 Menu Displays and Detailed Settings
10 TIMECODE TC OUT AUTO/GENE Selects the timecode signal output.
AUTO: Outputs the timecode generator output
during recording and outputs the timecode
reader output during playback.
GENE: Outputs the timecode generator output
during recording and playback.
DF/NDF
(When SYSTEM
FREQUENCY is
set to “59.94i”)
DF/NDF Sets DF or NDF mode.
DF: Drop frame mode
NDF: Non-drop frame mode
EXT-LK DF/NDF
(When SYSTEM
FREQUENCY is
set to “59.94i”)
INT/EXT Selects either internal setting or external setting for
DF/NDF.
INT: Internal
EXT: External
EXT-LK UBIT INT/EXT Sets whether the LTC UBIT setup value locks to an
INT or an EXT source when the timecode is locked
to an external source.
INT: Internal lock
EXT: External lock
LTC UBIT FIX/TIME Sets the data to be recorded in U-BIT of LTC.
FIX: Records the data that is set by the user.
TIME: Records the present time.
VITC UBIT (SD)
(When the CBKZ-
MD01 is installed)
FIX/TIME Sets the data to be recorded in U-BIT of VITC.
FIX: Records the data that is set by the user.
TIME: Records the present time.
WATCH AUTO
ADJ
OFF/ON Matches the time of the internal clock with the time
data of the user bits of an external timecode. Turns
the automatic time correction function of the
internal clock on or off.
UBIT GROUP ID 000/101 Selects the U-BIT GROUP ID.
VITC INS LINE 1
(When the CBKZ-
MD01 is installed)
NTSC: 12H to
16H to 19H
PAL: 9H to 19H
to 22H
Selects the line into which VITC is to be inserted.
VITC INS LINE 2
(When the CBKZ-
MD01 is installed)
NTSC: 12H to
18H to 19H
PAL: 9H to 21H
to 22H
11 ESSENCE
MARK
RET SHOT
MARK 1
OFF/ON For details, see “Recording essence marks” on
page 80.
RET SHOT
MARK 2
OFF/ON
INDEX PIC. POS 0SEC to 10SEC
(in 1 sec steps)
For details, see “Setting the thumbnail image at
recording time” on page 81.
No. Page Item Settings Description