Filter
Top Products
Operation Warnings
217
Chapter 9 Maintenance
Disc Error!
Warning
indication
State WARNING
indicator
Warning sound REC/TALLY BATT
——
b)
b)
b)
—
Problem VDR operation Action to take
A disc defect was detected. Recording continues, avoiding the
defect, but may be substandard.
If defects are detected
repeatedly, exchange the disc.
HUMID!
Warning
indication
State WARNING
indicator
Warning sound REC/TALLY BATT
——
b)
b)
c)
b)
—
Problem VDR operation Action to take
Condensation on the optical
pickup
Recording/playback continues but
stops when an error occurs on the
drive.
Stop recording/ playback, turn
off the power, then turn it on
again, and wait until the
HUMID indicator disappears.
Before Full
h)
Warning
indication
State WARNING
indicator
Warning sound REC/TALLY BATT
DISC
flash
f)
b)
b)
—
Problem VDR operation Action to take
Disc almost full. Operation continues. Be prepared to exchange the
disc.
Near MAX #
Warning
indication
State WARNING
indicator
Warning sound REC/TALLY BATT
——
b)
(only when
recording the
300th clip)
d)
—
Problem VDR operation Action to take
Nine or fewer clips remain until
the upper limit of 300 is reached.
Operation continues. Be prepared to exchange the
disc.
DISC FULL!
d)
Warning
indication
State WARNING
indicator
Warning sound REC/TALLY BATT
DISC and E
flash
g)
d) d) d)
—
Problem VDR operation Action to take
Disc full. Recording stops. Exchange the disc.
MAX # Clips
Warning
indication
State WARNING
indicator
Warning sound REC/TALLY BATT
——
d) d) d)
—
Problem VDR operation Action to take
The upper limit of 300 recorded
clips reached.
Cannot record. Exchange the disc.