Filter
Top Products
Menu List
154
Chapter 6 Menu Displays and Detailed Settings
13 CAM
CONFIG 2
TEST SAW
SELECT
SAW/REC Selects the test signal.
COLOR BAR
SELECT
ARIB/100%/
75%/SMPTE
Selects the HD color bar type.
USER & ALL
ONLY
OFF/ON Show only USER menu in the top menu.
RM COMMON
MEMORY
OFF/ON Selects whether or not to share settings for when a
remote control unit is connected and when the unit
is used alone.
RM REC START RM/CAM/
PARA
When an RM remote control unit is connected,
selects which recording start/stop buttons are
enabled.
RM: remote control unit
CAM: camcorder
PARA: both
SHT DISP MODE SEC/DEG Selects shutter speed display (seconds or degrees).
RM F NO
DISPLAY
CTRL/RET Selects the method used to display IRIS F values
on the MSU-900 or another remote control unit.
CTRL: Display on the basis of control value from
the camera (normal display method).
RET: Display on the basis of position information
from the lens (same method as when AUTO
IRIS is enabled).
14 PRESET
WHITE
COLOR TEMP
<P>
Display
reference color
temperature.
Sets the white balance preset value.
C TEMP BAL <P> (–99 to 99) Finer setting when the desired color could not be
obtained with the COLOR TEMP <P> color
temperature setting.
R GAIN <P> (–99 to 99) Sets the R gain preset value.
G GAIN <P> (–99 to 99) Sets the G gain preset value.
AWB ENABLE
<P>
OFF/ON When the WHITE BAL switch is set to PRST,
turns the function that enables execution of AWB
(auto white balance) on and off.
15 WHITE
FILTER
ND FILTER
CTEMP
OFF/ON Turns on and off the function which assigns
electrical CC filters to neutral density (ND) filters.
ND FLT CTEMP
<1>
3200K/4300K/
5600K/6300K
Select the color temperatures when the electrical
CC filters are assigned to the ND filters.
For details, see “To change the color temperature
when the ND filter is switched” (page 58).
ND FLT CTEMP
2-4
3200K/4300K/
5600K/6300K
ELECTRICAL
CC<A>
3200K/4300K/
5600K/6300K
Select the color temperatures selected by electrical
CC filter switching, when the electrical CC filter
switching function is assigned to an ASSIGN
switch.
For details, see “To switch between electrical CC
filters with an ASSIGN switch” (page 59).
ELECTRICAL
CC<B>
3200K/4300K/
5600K/6300K
ELECTRICAL
CC<C>
3200K/4300K/
5600K/6300K/
-----
ELECTRICAL
CC<D>
3200K/4300K/
5600K/6300K/
-----
No. Page Item Settings Description