Filter
Top Products
Testing the Camcorder Before Shooting
210
Chapter 9 Maintenance
3 Check each of the following operations.
• The menu is displayed on the viewfinder
screen.
• Turn the MENU knob and check that the
menu page changes to the next page.
• Press the MENU knob and check that
settings of each item of the selected page
are displayed.
• Turn the MENU knob and check that b
moves within the page.
• Press the MENU knob and check that b
placed before the item changes to z and z
placed before the setting of the item
changes to ?.
• Turn the MENU knob and check that the
setting of the selected item changes.
4 Set the OUTPUT/DCC switch to CAM,
and change the FILTER selector
position in the sequence of 1, 2, 3 and 4.
Check that the FILTER indicator on the
viewfinder screen displays the correct
numbers.
5 Carry out of the following operations,
and check that the ! indicator lights if
the corresponding item has been turned
on on the ‘!’ LED page of the USER
menu.
• Set the gain to anything but 0 dB by using
the GAIN selector and the GAIN SW page
of the OPERATION menu.
• Set the SHUTTER selector to ON.
• Set the WHITE BAL switch to PRST.
• Use the lens extender.
• Set the reference value of the auto iris to
other than the standard value.
6 Flick the SHUTTER selector from ON
to SELECT repeatedly, and check that
the shutter setting changes on the
viewfinder screen.
7 Pointing the camera at a suitable
subject, focus the camera and check the
picture on the viewfinder screen.
8 Set both of the AUDIO IN switches to
FRONT, and check that when sound is
input to a microphone connected to the
MIC IN connector on the front of the
camcorder, the audio level indicators
appear on the viewfinder screen.
9 Check that setting the ZEBRA switch to
ON and OFF makes the zebra pattern
appear and disappear on the viewfinder
screen.
Note
The results of checking in steps 3 to 9 may not be as
expected, depending on the settings relating to the
viewfinder display function. In this case, set the desired
items on the VF DISP 1 and VF DISP 2 pages of the
USER menu.
For details, see “Selecting the display items” on
page 171.
Testing the iris and zoom functions
1 Set the zoom to automatic zoom mode
and check that the power zoom operates
correctly.
2 Set the zoom to manual zoom mode and
check the zoom functions manually.
3 Set the iris switch on the lens to AUTO
and point the camera at objects of
different brightness. Check that the
automatic iris adjustment operates
correctly.
4 Set the iris switch on the lens to
MANUAL and check that turning the
iris ring manually adjusts the iris
correctly.
5 Set the iris switch on the lens back to
AUTO and check the following points
when the GAIN selector is moved from
L to M to H.
• Even when the brightness of the object
does not change, the iris is automatically
adjusted in accordance with the change in
the gain setting..
• The gain indicator on the viewfinder screen
changes to correspond to the change in
setting.