Filter
Top Products
12
English
Quick Start Guide – Recording on tape
Connecting the mains lead
Use the battery pack when using your camcorder outdoors (p. 24).
To eject the cassette
Follow the procedures above, and take out the cassette after the cassette compartment opens
completely in step 2.
Note
Do not press the cassette compartment down forcibly. Doing so may cause a malfunction.
Inserting the cassette
2Push the centre of the
cassette back to insert
the cassette. Insert the
cassette straight as far as
possible into the cassette
compartment with the
window facing up.
3Close the cassette
compartment by
pressing on the
cassette compartment.
After the cassette
compartment goes
down completely, close
the lid until it clicks.
How to hold your camcorder
Connect the plug with its v mark facing the
grip belt.
Open the
jack cover.
1
2
AC Adaptor (supplied)
1Slide OPEN/ZEJECT
in the direction of the
arrow and open the lid.
Quick Start Guide
3
Hold the camcorder, putting your wrist
through the belt and your fingers lightly on
the finger rest (p. 30).
Finger rest