Filter
Top Products
261
Troubleshooting Dépannage
When operating using the “Memory Stick” (DCR-PC105E only)
Symptom Cause and/or Corrective Actions
• The POWER switch is not set to MEMORY.
c Set it to MEMORY (p. 15).
• The “Memory Stick” is not inserted.
c Insert the “Memory Stick” (p. 14).
• The “Memory Stick” has already been recorded to its full
capacity.
c Delete unnecessary images and record again (p. 185).
• The “Memory Stick” formatted incorrectly is inserted.
c Format the “Memory Stick” using your camcorder or use
another “Memory Stick” (p. 141, 240).
• The write-protect tab on the “Memory Stick” is set to LOCK.
c Release the lock (p. 139).
• Your camcorder can play back the 100MSDCF folder but
cannot record any images in it.
• The image is protected.
c Cancel image protection (p. 184).
• The write-protect tab on the “Memory Stick” is set to LOCK.
c Release the lock (p. 139).
• You tried to delete more than 100 images in one session.
c You can select up to 100 images on the INDEX screen in one
session (p. 186).
• The write-protect tab on the “Memory Stick” is set to LOCK.
c Release the lock (p. 139).
• The write-protect tab on the “Memory Stick” is set to LOCK.
c Release the lock (p. 139).
• The write-protect tab on the “Memory Stick” is set to LOCK.
c Release the lock (p. 139).
• The index screen is not displayed.
c Press INDEX to display the index screen, then protect the
image (p. 184).
(continued on the following page)
The “Memory Stick” does not
function.
Recording does not function.
The image cannot be deleted.
You cannot format the “Memory
Stick.”
Deleting all the images cannot be
carried out.
You cannot protect the image.
Types of trouble and how to correct trouble