Filter
Top Products
242
Icon/item
TAPE SET
REC MODE*
1)
AUDIO MODE*
1)
qREMAIN
FRAME REC
INT. REC
Mode
z SP
LP
z 12BIT
16BIT
z AUTO
ON
z OFF
ON
ON
z OFF
SET
Meaning
To record in the SP (Standard Play) mode
To increase the recording time to 1.5 times the SP
mode
To record in the 12-bit mode (2 stereo sounds)
To record in the 16-bit mode (1 stereo sound with high
quality)
To display the remaining tape.
• For about 8 seconds after setting the POWER switch
to PLAYER*
2)
/VCR*
1)
or CAMERA and inserting a
cassette, then your camcorder calculates the
remaining amount of tape
• For about 8 seconds after is pressed
To always display the remaining tape indicator
To deactivate frame recording
To activate frame recording (p. 88)
To activate Interval Recording (p. 86)
To deactivate Interval Recording
To set INTERVAL and REC TIME for Interval
Recording
POWER
switch
*
2)
*
1)
*
1)
DCR-PC104E/PC105E only
*
2)
DCR-PC103E only
Notes on the LP mode
•When you record the tape in the LP mode on your camcorder, we recommend playing back the tape
on your camcorder. When you play back the tape on another camcorder or VCRs, noise may occur in
pictures or sound.
•When you record in the LP mode, we recommend using a Sony Excellence/Master mini DV cassette
so that you can get the most out of your camcorder.
•You cannot make audio dubbing on the tape recorded in the LP mode. Use the SP mode for the tape
to be audio dubbed.
•When you record in the SP and LP modes on one tape or you record some scenes in the LP mode, the
playback picture may be distorted or the time code may not be written properly between scenes.
Notes on AUDIO MODE
•You cannot dub audio sound when AUDIO MODE is set to 16BIT.
•When playing back the tape recorded in the 16-bit mode, you cannot adjust the balance of AUDIO
MIX.
Changing the menu settings