ARRI 416 Film Camera User Manual


 
11
Note: Sharpness 1 corresponds to the settings of older
IVS types e.g. the IVS 235.
Composite or Y/C signal at the BNC Connectors
The IVS has two BNC sockets which can be switched to
output two independent composite signals or one Y/C signal.
If selected, the Y/C signal comes from the same BNC
connectors on which the composite signal is output.
Move the cursor > with the keys Ê and Ë to the line
– BNC OUT. Pressing the keys Í or Ì will switch the
output signal on the BNC connector between composite
(VBS) and Y/C
If Y/C is selected a line symbol – will appear before
Y/C DATA indicating that the Y/C output can now be
switched between clean video and video with data.
Y/C signal with or without data
The Y/C signal can be switched between clean video and
video with data signals. Whichever option is selected the
Y/C signal is output from the same pair of connectors
Move the cursor > with the keys Ê and Ë to the line
– Y/C DATA. Pressing the key Í or Ì will switch between
normal video and video with data in the Y/C signal.
The line displays Y/C DATA ON or OFF.
Video-Ait-Sytem
MENU VIDEO/TEXT ADJUST
- FLICKERFREE ON
- LINE INTERP. ON
- SHARPNESS 2
-> - BNC OUT Y/C
- Y/C DATA ON
- GENLOCK OFF
- MINI MON DATA ON
- TXT WHITE LEV. 2
- TXT INVERS OFF
- TXT FINE POS 2
- EXIT
MENU VIDEO/TEXT ADJUST
- FLICKERFREE ON
- LINE INTERP. ON
- SHARPNESS 2
- BNC OUT Y/C
-> - Y/C DATA ON
- GENLOCK OFF
- MINI MON DATA ON
- TXT WHITE LEV. 2
- TXT INVERS OFF
- TXT FINE POS 2
- EXIT