Filter
Top Products
1
12.4 Camera Remote Control
Note: For details of how to use the RCU-1, WRC-1
and ESU-1, please see the instruction manuals
supplied with these units.
The 416 Plus can be remotely controlled by cable and via
wireless remote control.
Only one camera control unit may be used with the 416
Plus at any one time. More than one WMU-3 can be used
in parallel.
If the WRC-1 is used to control the camera either wireless
(with WMU-2/3) or with a cable to the LCS bus (with
WHA-2/3), the CCU LED turns from green to red to
indicate that the REMOTE connector is not available.
The following pages show some examples of remote
control setups:
If RCU/WRC and ESU are used in parallel they can be
connected to the “REMOTE” socket via the splitter cable
KC-88-5.
ARRIFLEX1Plu