Filter
Top Products
10.2 Setup
10.2.1 Installation
A 3 mm Allen key is used for installation.
• Undo the two screws holding the transport cover
aphoto and remove it.
• Remove the IVS transport cover from the video assist
by undoing the two screws on the IVS aphoto.
Note: It may be useful to screw the camera transport
cover to the IVS transport cover to store them
together as a pair because they are usually
required at the same time.
Video-Ait-Sytem
screws for transport cover
cover on the IVSscrews for cover on the IVS