ARRI 416 Film Camera User Manual


 

Displaying the Timecode Time and Frame Rate
(Mode 4)
Press the “MODE“ button until the display shows Mode 4.
The display shows the current timecode value.
The top line shows “Hours:Minutes“. The bottom line
shows “Seconds:TC generator frame rate“.
Note: The timecode generator frame rate matches the
camera‘s frame rate.
Turning Timecode Recording On and Off
(Mode 4)
Timecode recording is only possible at the Standard
Speeds of 23.976, 24.00, 25.00, 29.97 & 30.00 fps.
Press the “MODE“ button until the display shows Mode 4.
Press and hold the “SET” button until the “TC“ symbol
appears (ON) or disappears (OFF).
Note: For timecode recording a Timecode Module
must be tted to the magazines.
Note: Timecode recording is also turned on when the
camera receives a valid timecode signal into
the “TCC“ connector.
CameraOperation