Filter
Top Products
aphoto, one position approximately 50 mm (2“) forwards
and a third approximately 100 mm (4“) forwards. The handle
can be mounted in any of the positions facing forwards or
backwards; in this way, the grip balance can be adapted
to best t the lens in use.
The Low-Mode Bracket aphoto alone offers the lowest
prole and smallest plate-to-lens distance, optimal for Steadicam
applications. It can be attached with the viewnder on the
camera; however, since the Low-Mode Bracket remains under
the level of the viewnder itself, removal of the viewnder
will be necessary in applications requiring the attachment
of a longer plate onto the Low-Mode Bracket.
With the Low-Mode Riser tted, the plate to lens distance
is increased so that a longer plate attached to the Riser
will not collide with the viewnder. This is especially useful
in the situation where rapid switching between operation
in low-mode and operation with viewnder is necessary.
A tape hook is located camera right on the Low-Mode Riser,
and both the Low-Mode Bracket and Low-Mode Riser offer
diverse attachment points for additional accessories.
low mode bracket
Intallation