11
Cleaning the Field Lens
• Briey press the “PHASE” button, to position the shutter
to protect the mirror surface from damage as far as
possible.
• Before cleaning the eld lens, switch the camera’s main
switch off and disconnect from the power supply!
• Remove the lens or the protective cap from the
camera‘s lens port.
Do not touch the mirror surface!
• Pull the bre screen aphoto out of the holder by its
tongue aphoto using the special forceps.
• Pull the eld lens aphoto out of the holder by its
tongue aphoto using the special forceps.
• Clean the eld lens with a dry, lint-free cloth.
• Make sure that the frame is completely clean.
• Using the special forceps, push the eld lens as far as
it will go into the holder. A sprung-ball catch xes the
eld lens in the correct position.
• Check that the bre optic screen and its frame are
completely clean.
• Using the special forceps, push the bre optic screen
into the holder as far as it will go. A sprung-ball catch
xes the bre optic screen in the correct position.
Maintenance
tongue
bre screen
eld lens
mirror
