Filter
Top Products
11
Setting a User-Adjustable ARRIGLOW Color
(Mode 7)
• Push the “+“ DIMMER button on the camera left side so
you can see the ARRIGLOW in the viewnder.
• Press the “MODE“ button until the display shows Mode 7.
• Press the “SEL” button to make the ARRIGLOW color
number ash.
• Press the “SET“ button until U appears.
• Pressing the “SEL“ button will cycle through the “r“
(red), “G“ (green) and “B“ (blue) values of the user color.
• Pressing the “SET“ button changes the value from 0 (no
color) up to 16 (maximum color).
• Stop when the color is as you like it – no conrmation
is necessary.
CameraOperation