ARRI 416 Film Camera User Manual


 
0
Mode 1
total exposed lm or takelength
Mode 3
take length or total exposed lm
0
Film Counter
Displaying the Film Counting Values (Modes 1 and 3)
Film counting values are shown in Modes 1 and 3.
Two different counting values are shown respectively:
the total amount of exposed lm or
the take length (amount of lm used in an individual take)
A “t” in the rst digit of the upper display line indicates
the display of take length.
Setting the Film Counter Conguration (Mode 3)
The display conguration can be set individually.
The two shown combinations are possible:
The desired display conguration is set in Mode 3:
Change from Mode 1 to Mode 3 by pressing the
“MODE” button twice.
Press the “SEL” button twice; the rst digit in the upper
display line blinks.
Within three seconds, press the “SET” button.
The currently set counting value of Mode 3 is displayed.
The corresponding counting value in Mode 1 is
automatically altered.
RUN button
black bar to indicate Mode 1
PHASE button
CameraOperation
MODE button SEL / SET buttons
NORM button
PS/CCU button
LOCK button