Filter
Top Products
11
• Move the cursor > with the Ê and Ë keys to the line
– FILM COUNTER. The Í key will switch from TAKE (M/FT),
TAKE (SEC) to FTGE and back to TAKE (M/FT). The Ì
key will step through the options in the reverse order.
Note: The unit of measurement meters or feet is taken
from the setting of the camera. If the unit of
measurement on the 416 is set to meters, the
data on the IVS is also displayed in meters.
Exit
Use exit to return to the main menu.
• Move the cursor > with the keys Ê and Ë to the line
– EXIT and press the key Í or Ì.
Note: Pressing the Enter/Insert key Ñ for more than
three seconds will cause the system to exit the on-
screen programming mode completely, regardless
of which menu is activated, with the exception of
the positioning mode.
Video-Ait-Sytem
MENU SYSTEM/LDS/STATUS
- SYSTEM LINE ON
- LENS DATA LINE ON
- STATUS LINE ON
- POSITION
- BACKGROUND BOXED
- FILM COUNTER FTGE
-> - EXIT